Smart Home Audio 4 Channel Wireless Bluetooth In Wall Amplifier Touch Screen,Flush-mounted Radio,USB TF Card Power for Speaker

Smart Home Audio 4 Channel Wireless Bluetooth In Wall Amplifier Touch Screen,Flush-mounted Radio,USB TF Card Power for Speaker

SPECIFICATIONS:

Smart Home Audio 4 Channel Bluetooth Wall Amplifier Specifications:
● Power: AC220V(50HZ) allow 110V-250V
● Main screen size: 4 inch HD screen
● Output Power: RMS 4x20W
● Output Impedance: 4-8Ω
● T.H.D.: 0.03%
● Frequency Response: 20Hz-20KHz
● Audio S/N: 98dB
● Expand TF card memory: 32G
● USB: 0TG USB function, 32G can be read
● Size: 86*86*11mm

PACKAGE INCLUDED:

1 x smart touch screen on-wall amplifier
1 x mounted box
1 x remote control
1 x bracket and screw

NOTES:

● In some country, the FM Radio Function may not works well, because the signal may be affected due to different frequencies in different countries and regions.
● Languages only support English and Chinese, please check before your purchase.
● For this device, speaker cable and power cable is not included.
① Don’t connect exceed RMS 20W speaker and it should be 8ohm. If your speaker exceed 8ohm RMS 20Watts, the amplifier will be burnt out as your own risk.
② Use exceed 150-core pure copper speaker cable to connect speakers. Click to get:
200 core
100 core
③ Use power cable cord as the amplifier request (two cord).
● If there is any questions about the product or you need our technical support, please contact us.
● Video Playlist:
Connection Guide
1 How to connect antenna with the wall amplifier
2 How to use FM function 2
3 How to connect with phone via Bluetooth
4 How the wall amplifier controls and be controlled by the phone

*** Please noted that the speaker in the pictures just show that the amplifier can connect up to 4 speakers, but the speakers are not including in the package

Smart Home Audio 4 Channel Wireless Bluetooth In Wall Amplifier Instructions:
1. Speaker: Speaker wire (200 cores). RVH2X100,RVH2X200 connect to SPK R+ SPK R-.
2. Speaker: Speaker wire (200 cores). RVH2X100,RVH2X200 connect to SPK R+ SPK R-.
3. Audio input wire: Audio wire (three core shielded wire: commonly known as microphone wire). RVVP2X0.5, RVVP2X0.75 connect to AUX L+AUX R+GND.
4. Audio output wire: Audio wire (three core shielded wire: commonly known as microphone wire). RVVP2X0.5, RVVP2X0.75 connect to OUT R +OUT L+GND. Can be connected to other amplifiers.
5. FM: Radio antenna
6. Trigger the doorbell: Connect to GND+DB to trigger the doorbell.
7. Power supply terminal: Connect AC110V-240V power supply.

How to install Smart Home Audio 4 Channel Wireless Bluetooth In Wall Amplifier?

Package includes:

Notes: the link is not including the speakers, if you need the speakers together, please chcek: